F-250 D-50 TTB Kits
F-250 D-50 TTB Kits. These are specifily designed so that you can eliminate the leaf springs so that you can run coilovers
Package #1
Includes:
- Basic Stock Width C&T D-50's No plating/No Truss/No Uniballs (CORES ARE REQUIRED IN ADVANCE! THEY MUST BE CLEANED INSIDE & OUT OR THERE WILL BE A $200.00 CLEANING CHARGE & A 6 WEEK DELAY)
- Tube HGC Radius Arms
- Weld On WIY Radius Arm Connection Tab Kit
- Radius Arm Pivot Brackets
- 2 1 1/4" Hiems w/Jam Nuts & Misalignment Spacers
- Grade 8 Hardware
Package #2
Includes:
- Basic Stock Width C&T D-50's (CORES ARE REQUIRED IN ADVANCE! THEY MUST BE CLEANED INSIDE & OUT OR THERE WILL BE A $200.00 CLEANING CHARGE, WIRE WHEELED & A 6 WEEK DELAY)
- Plate Front Of TTB's & Add Truss & Add Uniball Pivots
- 1" Uniballs w/Spacers & Clips
- Tube HGC Radius Arms
- Weld On WIY Radius Arm Connection Tab Kit
- Radius Arm Pivot Brackets
- 2 1 1/4" Hiems w/Jam Nuts & Misalignment Spacers
- Grade 8 Hardware
Package #2B
Includes:
- Basic Stock Width C&T D-50's (CORES ARE REQUIRED IN ADVANCE! THEY MUST BE CLEANED INSIDE & OUT OR THERE WILL BE A $200.00 CLEANING CHARGE, WIRE WHEELED & A 6 WEEK DELAY)
- Plate Front Of TTB's & Add Truss & Add Uniball Pivots
- 1" Uniballs w/Spacers & Clips
- Boxed HGC Radius Arms
- Weld On WIY Radius Arm Connection Tab Kit
- Radius Arm Pivot Brackets
- 2 1 1/4" Hiems w/Jam Nuts & Misalignment Spacers
- Grade 8 Hardware
Package #3
Includes:
- Basic Stock Width C&T D-50's No plating/No Truss/No Uniballs (CORES ARE REQUIRED IN ADVANCE! THEY MUST BE CLEANED INSIDE & OUT OR THERE WILL BE A $200.00 CLEANING CHARGE, WIRE WHEELED & A 6 WEEK DELAY)
- Plate Front Of TTB's, Add Truss & Add Uniball Pivots
- Add Lower Truss/Skid Plate
- Tube HGC Radius Arms
- Radius Arm Pivot Brackets
- Weld On WIY Radius Arm Connection Tab Kit
- 2 1 1/4" Hiems w/Jam Nuts & Misalignment Spacers
- Coilover Towers
- Grade 8 Hardware
Package #3B
Includes:
- Stock Width C&T D-50's (CORES ARE REQUIRED IN ADVANCE! THEY MUST BE CLEANED INSIDE & OUT OR THERE WILL BE A $200.00 CLEANING CHARGE, WIRE WHEELED & A 6 WEEK DELAY)
- Plate Front Of TTB's, Add Truss & Add Uniball Pivots
- Add Lower Truss/Skid Plate
- 1" Uniball Pivots w/Spacers
- Boxed HGC Radius Arms
- Weld On WIY Radius Arm Connection Tab Kit
- Radius Arm Pivot Brackets
- 2 1 1/4" Hiems w/Jam Nuts & Misalignment Spacers
- Coilover Towers
- Grade 8 Hardware
Package #4
- C&T, Extended & Plated 4" Per Side D-50's (CORES ARE REQUIRED IN ADVANCE! THEY MUST BE CLEANED INSIDE & OUT OR THERE WILL BE A $200.00 CLEANING CHARGE & A 6 WEEK DELAY)
- Plate All 4 Sides, Add Truss, Add Truss & Uniball Pivots
- Lower Truss/Skid Plate
- 1" Uniball Pivots
- Boxed HGC Radius Arms
- Fully Welded Radius Arm Connection Tabs
- Radius Arm Pivot Brackets
- 2 1 1/4" Hiems w/Jam Nuts & Misalignment Spacers
Terms & Conditions
We ship FedEx & USPS. Products shipped USPS will ship directly to you. Products shipped through FedEx will ship to your nearest FedEx location where you will have to pick it up unless you request it to be shipped directly to you. If you choose to do so please contact us, or type it in the notes section when you check out & we will bill you separately for the cost difference to ship directly to you. We will NOT be held responsible for lost, stolen packages. Once they leave here you will receive a tracking number/numbers and it becomes 100% your responsibility. All of our products are built to order. No refunds or exchanges at anytime! By placing your order you agree to our terms.