Extended D-35 Extended TTB Kits
Ford Ranger & Explorer D-35 Twin Traction Beam Kits. We Offer These Fully Trussed & Extended & Plated up to 7" Per-Side
Note: D-35 cores are required in advance at your convenience. We do not stock D-35 cores
Package #1 :
Includes:
- C&T & extended up to 7" per side D-35's (Cores required in advance)
- Front truss/lower skid plate
- 1" Uniball pivots
- Boxed high ground clearance radius arms
- Radius arm pivot brackets
- 1 1/4" Hiems w/Jam nuts & misalignment spacers
- 4340 Axles
- Grade 8 hardware
Package #2 w/Steering Swinger Kit (No Tubes)
Includes:
- C&T & extended up to 7" per side D-35's (Cores required in advance)
- Front truss/lower skid plate
- 1" Uniball pivots
- Boxed high ground clearance radius arms
- Radius arm pivot brackets
- 1 1/4" Hiems w/Jam nuts & misalignment spacers
- 4340 Axles
- Double swing steering swinger with frame mounts/tabs
- Bushing kits w/inner sleeves
- 7/8" Hiems with jam nuts & misalignment
- Threaded Weld In Bungs (No Tubes)
- Grade 8 hardware
Package #3 w/Steering Kit w/2 "Geometry" Tie-Rod Tubes
Includes:
- C&T & extended up to 7" per side D-35's (Cores required in advance)
- Front truss/lower skid plate
- 1" Uniball pivots
- Boxed high ground clearance radius arms
- Radius arm pivot brackets
- 1 1/4" Hiems w/Jam nuts & misalignment spacers
- 4340 Axles
- Double swing steering swinger with frame mounts/tabs
- Bushing kits w/inner sleeves
- 7/8" Hiems with jam nuts & misalignment
- 1 Pre cut tube w/threaded bungs (Connects from pitman arm to swinger)
- 1 Pre cut tube w/threaded bungs (Connects from swinger to swinger)
- 2 Extra long 1.5" x .250 wall tubes w/threaded bungs (Connects from swingers to knuckles)
- Grade 8 hardware
Package #4 Uniball Steering Knuckle Option:
Includes:
- C&T & extended up to 7" per side D-35's (Cores required in advance)
- Front truss/lower skid plate
- 1" Uniball pivots
- Boxed high ground clearance radius arms
- Radius arm pivot brackets
- 1 1/4" Hiems w/Jam nuts & misalignment spacers
- 4340 Axles
- D-35 Uniball Steering Knuckles w/Steering Tabs
- WIY Brake Caliper Mounts
- 4 1" Uniballs w/Spacers
- Alignment Cams
- Grade 8 hardware
Package #5 w/Steering Kit w/2 "Geometry" Tie-Rods & D-35 Uniball Steering Knuckle Option:
Includes:
- C&T & extended up to 7" per side D-35's (Cores required in advance)
- Front truss/lower skid plate
- 1" Uniball pivots
- Boxed high ground clearance radius arms
- Radius arm pivot brackets
- 1 1/4" Hiems w/Jam nuts & misalignment spacers
- 4340 Axles
- Double swing steering swinger with frame mounts/tabs
- Bushing kits w/inner sleeves
- 7/8" Race Series Hiems with jam nuts & misalignment
- 1 Pre cut machined & threaded tube (Connects from pitman arm to swinger)
- 1 Pre cut machined & threaded tube (Connects from swinger to swinger)
- 2 extra long 1.5" x .250 wall tubes w/threaded bungs (Connects from swingers to knuckles)
- D-35 Uniball Steering Knuckles w/Steering Tabs
- WIY Brake Caliper Mounts
- 4 1" Uniballs w/Spacers
- Alignment Cams
- Grade 8 hardware
Terms & Conditions
We ship FedEx & USPS. Products shipped USPS will ship directly to you. Products shipped through FedEx will ship to your nearest FedEx location where you will have to pick it up unless you request it to be shipped directly to you. If you choose to do so please contact us, or type it in the notes section when you check out & we will bill you separately for the cost difference to ship directly to you. We will NOT be held responsible for lost, stolen packages. Once they leave here you will receive a tracking number/numbers and it becomes 100% your responsibility. All of our products are built to order. No refunds or exchanges at anytime! By placing your order you agree to our terms.