RZR PRO XP/Turbo R 2 Seater 2" Lowering Seat Bases

 RZR PRO XP, Turbo 2 Seater 2"+ Lowering Seat Bases. They are a great option if you are very tall & are looking to lower your stock or aftermarket seats. 
 
Disclaimer... unless your shoulders are at the same level or up to 10 Degrees higher as your shoulder harness mount location, I do NOT recommend lowering your seats. Its one thing to possible have a cage that's to low, its another to have harnesses that are too high. Its your call but just understand this before ordering. 
 
 
Fits The 2 Seater PRO XP, Turbo R Driver Side & Passenger Side Seats 
Key Features:
Ultra stiff design & light weight 3/16" Alumimum (These are stiffer than ANY steel design)
Lowers stock seats a full 2" while retaining the origonal quick release brackets
Lowers aftermarket seats up to 2" with aftermarket quick release brackets
Lowers aftermarket seats up to 2 3/4" with standard bolt on seat brackets
Lowers aftermarket seats up to 3 1/2" when direct mounted to the base
Lower center of gravity
 
 
Notes: You will have to cut the tubes welded to the rear plate, then smooth them out before mounting the new base.
2 Seater Seat Base Options: 
2 Seater Front Seat Aluminum Driver Side Base w/UHMV Spacers
2 Seater Front Seat Aluminum Passenger Side Base 
Grade 8 Hardware (Over Sized to 5/16" & 3/8" for added strength)